Body Fat Calculator

Your body fat percentage from a tape measure in about a minute. The US Navy method uses your height, neck and waist (and hips for women), and usually lands within 3 to 4 points of a DEXA scan.

Free, no sign-up. Your numbers in, a clear target out.

Calculator

Calculate Your Body Fat Percentage

Live

Sex

Height

ft
in
in

Just below the Adam's apple.

in

Level with your navel, relaxed.

lb

01

Body fat chart for men and women

Body fat percentage ranges from the American Council on Exercise (ACE), one of the most widely used body fat charts. Essential fat is the minimum the body needs to work normally; women carry more of it for reproductive health, which is why every row sits higher for women.

Men

2%35%

Women

10%45%
  • Essential fat
  • Athletes
  • Fitness
  • Average
  • Obese
Body fat percentage chart for men and women, ACE categories
CategoryWomenMen
Essential fat10 to 13%2 to 5%
Athletes14 to 20%6 to 13%
Fitness21 to 24%14 to 17%
Average25 to 31%18 to 24%
Obese32% and up25% and up

The ACE table does not change with age. Other references, such as the Gallagher et al. (2000) ranges built from BMI, allow a few more points as people get older, so a reading near a boundary is not a verdict.

02

How to measure for the Navy method

  • Use a soft, non-stretch tape

    Snug on the skin without pressing in. Stand tall, relaxed, and measure at the end of a normal breath out, not sucked in.

  • Neck

    Just below the Adam's apple (larynx), with the tape sloping slightly down toward the front. Look straight ahead and keep your shoulders down.

  • Waist

    Men: level with the navel. Women: at the narrowest point of the waist, usually a little above the navel. Keep the tape level all the way round.

  • Hips (women)

    Around the widest part of the buttocks, feet together, tape level.

  • Take three and average

    Measure each spot three times, use the average, and keep the same time of day (morning, before eating) for repeat checks.

03

How accurate is the Navy method?

Hodgdon and Beckett built the equations in 1984 at the Naval Health Research Center by comparing tape measurements with underwater weighing. In their data the typical error was about 3.5 percentage points, and later comparisons with DEXA land in the same 3 to 4 point range. The tape costs almost nothing, so it is easy to repeat.

It reads high in people with a thick neck and a lot of muscle, and low in people who carry fat mostly on the hips and thighs. If you need precision, a DEXA scan is the usual reference, though even DEXA results differ somewhat between machines.

The calculator also offers a no-tape estimate from BMI, age and sex (Deurenberg et al., 1991). It is rougher, with a typical error around 4 points, and it overestimates body fat in muscular people because BMI counts muscle as weight.

04

The formula

The US Navy equations (Hodgdon and Beckett, 1984), with all measurements in inches:

  • Men: 86.010 × log10(waist − neck) − 70.041 × log10(height) + 36.76
  • Women: 163.205 × log10(waist + hip − neck) − 97.684 × log10(height) − 78.387

The metric version, often printed with measurements in centimeters, first estimates body density and then converts it with the Siri equation (495 ÷ density − 450). It gives results within about 1.5 points of the inch version. This calculator converts centimeters to inches and uses the inch version, so switching units never changes your answer.

Once you have body fat, fat mass is weight × body fat %, and lean body mass is the rest. Worked example: a man 5 ft 10 in tall with a 15 in neck and 34 in waist comes out at 17.5% body fat.

05

Army body fat calculator: what changed

The Army no longer uses this neck and waist formula. In June 2023, Army Directive 2023-11 replaced it with a one-site tape test: a single waist (abdominal) measurement at the navel plus body weight, phased in over the following year. Under an earlier 2023 directive (Army Directive 2023-08), Soldiers who score at least 540 on the Army Combat Fitness Test, with at least 80 points in each event, are exempt from the tape.

So this calculator is not the Army's current test. For an Army standard, use the current Army regulation (AR 600-9) and the official tables. For tracking your own body fat over time, the Navy method here works well.

06

Lower body fat without losing muscle

Lose about 0.5 to 1% of body weight a week (the pace Helms et al. 2014 suggest for keeping muscle), eat enough protein (1.6 to 2.2 g per kg of body weight, from the Morton et al. 2018 meta-analysis), and keep lifting so the weight you lose is mostly fat. Re-measure every 2 to 4 weeks. Your waist and the scale moving together, with strength holding, is the sign it is working.
How body recomposition works

07

Track it in Protocol

Weigh-ins log free in Protocol on iPhone and the web, with an optional body fat percentage beside each one. If your smart scale writes weight and body fat to Apple Health, Protocol reads them from there automatically, so the trend builds itself next to your meals, training and sleep. One app, everything connected.
Read the Body Composition Protocol

FAQ

Common questions

How do I calculate my body fat percentage?
With a tape measure: measure your height, neck and waist (plus hips for women), then use the US Navy formula. For men it is 86.010 × log10(waist − neck) − 70.041 × log10(height) + 36.76, in inches. The calculator above does it for you in inches or centimeters.
How accurate is the Navy body fat calculator?
For most people it lands within about 3 to 4 percentage points of a lab method such as DEXA or underwater weighing. It can read high in very muscular people with a thick neck. It is best for tracking change over time with the same tape and technique.
What is a healthy body fat percentage?
On the ACE chart, 14 to 24% covers the fitness and average rows for men, and 21 to 31% for women. Athletes often sit at 6 to 13% (men) and 14 to 20% (women). Essential fat is 2 to 5% for men and 10 to 13% for women, and going near it is not healthy to hold.
Is this the same as the Army body fat calculator?
No. Since Army Directive 2023-11 (June 2023), the Army uses a one-site tape test based on waist at the navel and body weight, not this neck and waist formula. Use the current AR 600-9 tables for an official Army result.
Can I estimate body fat without a tape measure?
Yes, roughly. The BMI option uses the Deurenberg (1991) formula: 1.2 × BMI + 0.23 × age − 10.8 × sex − 5.4, where sex is 1 for men and 0 for women. It cannot tell muscle from fat, so it is less accurate for people who lift.
What is my body fat ratio?
Body fat ratio usually means the share of your weight that is fat, the same thing as body fat percentage. Multiply your weight by it to get fat mass; the rest is lean body mass.
How often should I measure body fat?
Every 2 to 4 weeks is enough. Body fat changes slowly, and measuring more often mostly picks up noise from water, food and tape placement.